Surface Protection Tape with high performance film SPV 6065E5 HP

SPV 6065E5 HP is a surface protection tape suitable to protect high gloss metals during mechanical processes such as deep drawing and profiling.

This product consists of a special tear resistant “High Performance” PO film coated with a pressure sensitive “easy peel” acrylic-based adhesive.

Features
Structure
Properties
Applications

Features

Special "easy-peel" adhesive
Zipper effect during peel off
Very low unwind
High adhesion level
Very good deformation behaviour
High tear resistance in all directions (High Performance PO film)
For protection of high gloss surfaces
Good humidity resistance
Substrate identification and inspection
Recyclable

Structure

Pressure sensitive acrylic-based "easy peel" adhesive
Tear resistant "High Performance" blue transparent PO film

Properties

	Typical Value	Test Method
Film type	Tear resistant PO film
Adhesive type	Acrylic-based
Total thickness	0.060 mm	EN 1942
Adhesion on BA steel	200 cN/20 mm	EN 1939
Weatherability on BA steel*	25 hours	ISO 4892-2
Tensile strength MD**	40 N/20 mm	EN 14410
Elongation MD	600%	EN 14410
Transport and storage conditions	Temperature 15 to 30 °C
Transport and storage conditions	Relative humidity 40 to 75% RH

* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD = Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.

Applications

SPV 6065E5 HP is a surface protection tape suitable to protect high gloss substrates such as aluminium and stainless steel during mechanical processes.The use of this tape makes it possible to process the protected surfaces with a high adhesion level.

Back to product category list Back to product detail list