Skip to Main text

Clear molding compound for optical semiconductor NITORON T(NT) Series

About the Product Guidance

NT Product Name (for Transfer)

Names of NT products for transfer have three parts connected by a hyphen as shown below. NT-XXX-ABBCC NT-XXXX-ABCC The first “NT” is an abbreviation for NITRON -TTM, which is Nitto’s optical semiconductor encapsulating transparent resin. The second part generally consists of 3 or 4 letters, and represents the product group with identical main material and composition. Products with the same letters will show similar major properties. If the last letter is either H or S (NT-300 Series) this shows the molding speed difference. The last part consists of 4 to 5 numbers, and indicates the color code, cut-off wavelength, and content of optical dispersant. See the following chart for descriptions.
AB,BBCC
Color groupProduct release serial number within the color groupContent of optical dispersant (c.c wt%)
1Transparent0-9 or  00-9900-99
2Red
3Green
4Yellow
5Blue
6Orange
7,8,9Black
ABB: Cut-off wavelength (nm) transmissivity 1%
700, 770, 820, 860
(1mm thick)
750
(3mm thick)
IRInfrared rays cutting
AppearanceFor Transfer Mod
Feature
Mold Release AqentSeparateMoldReleaseAgent RequiredSelf Release
AdhesionGoodExcellent-
General
NT-8506
NT-8500P
NT-8510
-
Fast Curing
NT-8526
NT-8590
NT-8528
NT-300 Series
LowViscosity---
High Reliability-
NT-510
NT-600H
-
Weather Ability
NT-800
NT-820SI
--
LowStressNT-8511-NT-341
Special ModelNT-8570-NT-380W
Solder resistance
NT-8522
NT-8523
NT-8524H
NT-330H
NT-324H
Cut-off Wavelength
700, 750, 770, 820, 860 nm IR application
IR cut (for illuminance sensor)
Increase in heat resistanceFiller content 30w%/50wt%

Applications

Light Emitting Element(LED)
l_semicon_001_img_application01_txt

RGB

  • In/outdoor Display
  • Light Source of a Fax
  • Stop Light of a Vehicle
  • Backlight Source
l_semicon_001_img_application02

l_semicon_001_img_application03_txt
  • Remote Control
  • PC-PC/Tel

Data Transmission (IrDA)

l_semicon_001_img_application04

Light Receiving Element
l_semicon_001_img_application05_txt

Photo Di / Tr / IC

  • Image Transmission
l_semicon_001_img_application07

l_semicon_001_img_application06_txt

CCD,MOS

  • Photoreceiver of Digital Cameras
l_semicon_001_img_application08

Light Emitting Receiving Compount Element
l_semicon_001_img_application09_txt
l_semicon_001_img_application10_txt
l_semicon_001_img_application12_txt
l_semicon_001_img_application11
l_semicon_001_img_application13
l_semicon_001_img_application14
  • Distance Sensor
  • Barcode Reader
  • Pickup of CDs,DVDs and Blu-Rays
  • Optical Mouse for Computers    

Specifications

IR Cut resin for Human Eye Ambient Sensor

Absorption Spectrum of a Visible Light Shielding Optical Semiconductor Sealing Resin

Line Up

About the NT-300 Series

Curing timeAdhesion with chipsAdhesion with the frame
CapableGoodExcellent
H Series (2 minute curing type)GoodNT-301HNT-300HNT-309H
ExcellentNT-305HNT-304HNT-306H
S Series (45 second curing type)Good-NT-300S-
ExcellentNT-307SNT-308S-
The official name for the products above have 4 or 5 numbers added (i.e. NT-3XXH-ABBCC). These numbers represent properties such as color phase, cut-off wavelength, and optical dispersant content rate. Products with reduced particles have the letter Q added (i.e. NT-3XXHQ-ABBCC).
 

Regarding the cleaning of the die for the NT-300, the following conditions are recommended.) Clean and deburr with a cleaning resin.) Then to condition the die, mold the conditioning resin* a few times.

  • * Conditioning resin: KNJ-P (Nitto Denko product)

Resin with Tranceparent Filler

Filler contentswt%03050
S.G.-1.21.451.66
TG(DSC)TmgC152150151
CTE1TMAppm/C645243
CTE2TMAppm/C17014212.5
Direct ray transmittance650nm%98.542.228.5
Total light transmittance650nm%94.291.890.6
Water Absorption85C/85%RH,168hrwt%1.831.290.99
Thermal ConductivityW/mK0.20.260.34
  • *Transparent Filler can be a applled for NT-510 Series/600 Series/300 Series sofar. But other items is negotiable. 
  • *The above values are not specifications and cannot be guaranteed.

Contact Us

For inquiries about products.

Business Hours(Japan time) 9:00-17:30 Except for Sat, Sun, and Holidays

Global Site

Contact Us

Business Hours:9:00-17:30 (Japan Time)

Except for Sat, Sun, and Holidays
Global Site