Skip to Main text

NITTO EPTSEALER 686C

EPT-Sealer 686C is a soft-closed cell EPDM foam with excellent sealing properties. The closed cell structure gives excellent water- and air-tightness, even under severe conditions, with low compression load. Furthermore it combines excellent heat insulation and soundproofing properties with a good cushioning effect.

This unique foam can be laminated with Nitto’s advanced adhesive technology to seal (complex) gaps against water, wind, dust, noise and heat.

Download

Features

  • Closed cell structure
  • Soft / conformable
  • Cushioning
  • Ozone resistance
  • Good weatherability
  • Fungus free
  • Excellent ageing performance (dimensional heat stability)
  • Excellent water sealing
  • Excellent sound insulation
  • Wide range of performing tapes

Structure

  1. 686C  :

                    -    Soft -closed cell foam

                    -    Acrylic-based adhesive

                    -    Non-woven carrier

                    -    Acrylic-based adhesive

                    -    Release liner

Properties

Foam thickness 3 - 25 mm
Tensile strength 125 kPa
Elongation 450%
Density 130 kg/m³
Compression load (33%) 21 kPa
Waterabsorption (50%) 2.5%
Watertightness (30%) No leakage

Applications

- The performance of Nitto EPT-Sealer on specific substrate must be assured by the user before implementation.

- During storage and transport, do not over stack the product, as this may cause deformation.

-EPT-Sealer should be applied to clean and dry surface. Remove excess oil, moisture and dirt from the substrate surface to which the sheet is applied.

- In order to avoid entrapped air-bubbles, tension and shear, the customer should determine appropriate application conditions.

- The best application conditions are obtained at a temperature between 15 °C and 40 °C.

- Appropriate compression is needed to have sealing performance.

- In case of use of primer, check beforehand the impact of the primer to the performance of the EPTSealer. Wrong use of primer can lead to loss of adhesion.

- Please consult Nitto Europe for any robotic application regarding more specific precautions.- Thickness as referred in orders, article description and on the packaging is related to the foam and is excluding tape and release liner thickness.

Contact Us

Customer Support Center

TEL +61-3-9213-1700

Business Hours(Australia time)08:30-17:00 Except for Sat, Sun, and Holidays

About NITTO's Support

Search by other product categories

Contact Us

Customer Support Center

TEL +61-3-9213-1700
Business Hours(Australia time)08:30-17:00
Except for Sat, Sun, and Holidays