Surface Protection Tape for light mechanical deformations of metals EASY DRAW 8055LD7

Nitto EASY DRAW 8055LD7 is a surface protection tape which protects high gloss stainless steel during light mechanical processing.

This product gives the specific advantage where short dwelling and processing time is requested by the customer. This product consists of a blue transparent PO film coated with a special pressure sensitive “easy-peel” acrylic-based adhesive.

Download

Datasheet

SDS

Datasheet

NBE_EASYDRAW8055LD7_ENG

SDS

The information contained herein is based on all the documentation, information and data that can be obtained as of the date issued.

However, Nitto Denko Co., provides no warranties or guarantees, express or implied, regarding the accuracy or completeness of the information on contained amount, physical or/and chemical properties, and hazards or/and harm mentioned herein.

As for SDS of products categorized as "Article", Nitto Denko Co., voluntarily creates and releases the SDS for the particular products which frequently receive inquiries.

SDS_NBE_SPV8055LD7_ENG

Features
Structure
Properties
Applications

Features

Minimum press line contamination (saving cleaning time)
Minimum amount of processing oil necessary
Very good deformation behaviour
Special "easy-peel" adhesive
Zipper effect during peel off
Medium adhesion level
Very low unwind
Excellent tear resistance in all directions
Good humidity resistance
Recyclable

Structure

Pressure sensitive acrylic-based "easy peel" adhesive
Excellent tear resistant blue transparent polyolefine film

Properties

	Typical Value	Test Method
Film type	PO film
Adhesive type	Acrylic-based
Total thickness	0.050 mm	EN 1942
Adhesion on BA steel	160 cN/20 mm	EN 1939
Weatherability on BA steel*	None	ISO 4892-2
Tensile strength MD**	40 N/20 mm	EN 14410
Elongation MD	630%	EN 14410
Colour	Blue transparent
Transport and storage conditions	Temperature 15 to 30 °C
Transport and storage conditions	Relative humidity 40 to 75% RH

* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD = Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.