Skip to Main text

Surface Protective Material for Plastic SPV-J Series

Offers outstanding surface protective for printing, punching and transportation of plastic nameplates.

SPV-J Series of polyolefin surface protective materials were developed to provide effective surface protective for printing, punching and transportation of plastic nameplates.

Download

Features

  • Minimal change in adhesive strength following application ensures easy peeling.
  • J Series has variety adhesive strength level. The product can adjust various surface roughness and process levels.
  • Offers excellent initial adhesion and easy application. Film can be easily peeled and re-applied (manual application) when inspecting printed surfaces.
  • Suitable for nameplate punching and molding processes.

Properties

ItemThickness[mm]*1Adhesive strength[N/20mm]*2
SPV-J-2000.0450.25
SPV-J-3000.0450.45
SPV-J-4000.0450.90
SPV-J-5000.0451.20

[Test method]

  • *1: Nominal thickness
  • *2: Peeling angle: 90°, Peeling speed: 300mm/min

Applications

  • Surface protection of precoated steel plates/name plates during transportation/processing.

Precautions

  • Avoid sunlight and store at room temperature and moderate humidity.
  • Do not press too strong when applying. This may cause the end of the tape to peel.
  • If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
  • For use under severe conditions, please test and evaluate the product thoroughly beforehand.
  • Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
  • Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
  • Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
  • Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.
  • When you paint after peeling off the surface protective material, be sure to check the surface washing, pretreatment, or paint baking conditions to ensure the paint adhesion before usage.

  • The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
  • The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
  • Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
  • This product and/or its features may change or be discontinued without any prior notice.
  • The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.

Contact Us

Customer Support Center

TEL +61-3-9213-1700

Business Hours(Australia time)08:30-17:00 Except for Sat, Sun, and Holidays

About NITTO's Support

Adobe Reader is required to view PDF files.
If not yet installed, please download it from the Adobe website.

Search by other product categories