Skip to Main text

Surface Protective Material for Plastic SPV-J Series

Offers outstanding surface protective for printing, punching and transportation of plastic nameplates.

SPV-J Series of polyolefin surface protective materials were developed to provide effective surface protective for printing, punching and transportation of plastic nameplates.



  • Minimal change in adhesive strength following application ensures easy peeling.
  • J Series has variety adhesive strength level. The product can adjust various surface roughness and process levels.
  • Offers excellent initial adhesion and easy application. Film can be easily peeled and re-applied (manual application) when inspecting printed surfaces.
  • Suitable for nameplate punching and molding processes.


ItemThickness*1Adhesive strength*2
SPV-J-2000.045 mm / 1.77 mil0.25 N/20mm / 1.14 oz/in
SPV-J-3000.045 mm / 1.77 mil0.45 N/20mm / 2.05 oz/in
SPV-J-4000.045 mm / 1.77 mil0.90 N/20mm / 4.11 oz/in
SPV-J-5000.045 mm / 1.77 mil1.20 N/20mm / 5.48 oz/in

[Test method]

  • *1: Nominal thickness
  • *2: Peeling angle: 90°, Peeling speed: 300mm/min


  • Surface protection of precoated steel plates/name plates during transportation/processing.


  • Avoid sunlight and store at room temperature and moderate humidity.
  • Do not press too strong when applying. This may cause the end of the tape to peel.
  • If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
  • For use under severe conditions, please test and evaluate the product thoroughly beforehand.
  • Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
  • Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
  • Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
  • Especially for applications against natural substrate (marble stone, lumber, etc.) please contact our sales representative in charge.
  • When you paint after peeling off the surface protective material, be sure to check the surface washing, pretreatment, or paint baking conditions to ensure the paint adhesion before usage.

  • The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
  • The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
  • Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
  • This product and/or its features may change or be discontinued without any prior notice.
  • The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.

Contact Us

Customer Support Center

TEL 1-800-755-8273

Business Hours (EST) 8:00 a.m.-5:30 p.m. Except for Sat, Sun, and Holidays

Adobe Reader is required to view PDF files.
If not yet installed, please download it from the Adobe website.

Search by other product categories