Skip to Main text

NITTO EPTSEALER 686CEP

EPT-Sealer 686CEP is a soft-closed cell EPDM foam with excellent sealing properties. The closed cell structure gives excellent water- and air-tightness, even under severe conditions, with low compression load. Furthermore it combines excellent heat insulation and soundproofing properties with a good cushioning effect.

This unique foam can be laminated with Nitto’s advanced adhesive technology to seal (complex) gaps against water, wind, dust, noise and heat.

Download

Features

  • Closed cell structure
  • Soft / conformable
  • Cushioning
  • Ozone resistance
  • Good weatherability
  • Fungus free
  • Excellent ageing performance (dimensional heat stability)
  • Excellent water sealing
  • Excellent sound insulation
  • Wide range of performing tapes

Structure

  1. 686CEP  :

                    -    Soft -closed cell foam

                    -    Acrylic-based adhesive

                    -    Non-woven carrier

                    -    Acrylic-based adhesive

                    -    Release liner

High-end tape for LSE (low surface energy)

Properties

Foam thickness 3 - 25 mm
Tensile strength 125 kPa
Elongation 450%
Density 130 kg/m³
Compression load (33%) 21 kPa
Waterabsorption (50%) 2.5%
Watertightness (30%) No leakage

Applications

- The performance of Nitto EPT-Sealer on specific substrate must be assured by the user before implementation.

- During storage and transport, do not over stack the product, as this may cause deformation.

-EPT-Sealer should be applied to clean and dry surface. Remove excess oil, moisture and dirt from the substrate surface to which the sheet is applied.

- In order to avoid entrapped air-bubbles, tension and shear, the customer should determine appropriate application conditions.

- The best application conditions are obtained at a temperature between 15 °C and 40 °C.

- Appropriate compression is needed to have sealing performance.

- In case of use of primer, check beforehand the impact of the primer to the performance of the EPTSealer. Wrong use of primer can lead to loss of adhesion.

- Please consult Nitto Europe for any robotic application regarding more specific precautions.- Thickness as referred in orders, article description and on the packaging is related to the foam and is excluding tape and release liner thickness.

Contact Us

TEL +32-89-360111

Business Hours (WET) 8:00h-17:00h Except for Sat, Sun, and Holidays
Nitto is present in 14 countries in the EMEA region. Find your local contact details here.

Search by other product categories

Contact Us

TEL +32-89-360111
Business Hours (WET) 8:00h-17:00h
Except for Sat, Sun, and Holidays

Nitto is present in 14 countries in the EMEA region. Find your local contact details here.