Skip to Main text

Surface Protection Tape for light mechanical deformations of metals EASY DRAW 8055LD7

Nitto EASY DRAW 8055LD7 is a surface protection tape which protects high gloss stainless steel during light mechanical processing.

This product gives the specific advantage where short dwelling and processing time is requested by the customer. This product consists of a blue transparent PO film coated with a special pressure sensitive “easy-peel” acrylic-based adhesive.



  • Minimum press line contamination (saving cleaning time)
  • Minimum amount of processing oil necessary
  • Very good deformation behaviour
  • Special "easy-peel" adhesive
  • Zipper effect during peel off
  • Medium adhesion level
  • Very low unwind
  • Excellent tear resistance in all directions
  • Good humidity resistance
  • Recyclable


  1. Pressure sensitive acrylic-based "easy peel" adhesive
  2. Excellent tear resistant blue transparent polyolefine film


Typical Value Test Method
Film type PO film
Adhesive type Acrylic-based
Total thickness 0.050 mm EN 1942
Adhesion on BA steel 160 cN/20 mm EN 1939
Weatherability on BA steel* None ISO 4892-2
Tensile strength MD** 40 N/20 mm EN 14410
Elongation MD 630% EN 14410
Colour Blue transparent
Transport and storage conditions Temperature 15 to 30 °C
Relative humidity 40 to 75% RH

* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different.
** MD = Machine Direction
CAUTION: The above are typical values and should not be used in writing specifications.
Details from the test methods are described on the customer product specification.


Nitto EASY DRAW 8055LD7 is an ideal product for protecting high gloss stainless steel during light mechanical processes.

Search by other product categories