Nitto 511M80P Light is a surface protection tape, which protects metal surfaces during Fiber and CO2 laser cutting processes
Nitto FIBERGUARD 511M80P consists of a PE film with a special release coating and coated with a pressure sensitive natural rubber-based adhesive with a medium adhesion level
 |
| Typical value | Test method | |
| Film type | LDPE film | - |
| Adhesive type | Rubber-based | - |
| Total thickness | 80 µm | BTM019 |
| Adhesion to BA steel | 210 cN/25mm | ISO 29862 |
| Weatherability on BA steel* | 100h | ISO 4892-2 |
| Tensile strength MD** | 40 N/25mm | ISO 29864 |
| Elongation MD | 300% | ISO 29864 |
| Colour | Black/Gray with light blue printed arrows and Nitto brand name | - |
| Transport and storage conditions | Temperature 15 to 30 °C | - |
| Relative humidity 40 to 75% RH | - |
* The weatherability is measured on BA steel. Depending on the substrate the weatherability performance can be different
** MD = machine direction
Nitto FIBERGUARD 511M80P Light protects metal surfaces during both Fiber and CO2 laser cutting processes. It is ideal for high speed and performance laser cutting machines. Printed arrows allow you to install your metal in the appropriate direction after laser cutting process. This will enable you to protect your substrate till end of the supply chain, resulting in an optimum protection from scratches and impurities during various mechanical processes (bending, stamping, forming, etc.)
TEL +32-89-360111
Business Hours (WET) 8:00h-17:00h
Except for Sat, Sun, and Holidays
Nitto is present in 14 countries in the EMEA region. Find your local contact details here.
